Polyamide cured zinc epoxy primer

A hard wearing, good abrasion and impact resistance.
Good resistance to wide spectrum of chemical.
Excellent adhesives to concrete, masonry, plasters and
other building material

DRYING TIME
TOUCH DRY 2 HOURS
HARD DRY 4 HOURS
CONTINUOUS TO TOP COAT APPLICATION 4 HOURS

Primer coat for metal surface

– Airless Spray
– Spray Gun
– Brush or Roller

Polyamide cured zinc epoxy primer

A hard wearing, good abrasion and impact resistance.
Good resistance to wide spectrum of chemical.
Excellent adhesives to concrete, masonry, plasters and other building material

DRYING TIME
TOUCH DRY 2 HOURS
HARD DRY 4 HOURS
CONTINUOUS TO TOP COAT APPLICATION 4 HOURS

Primer coat for metal surface

– Airless Spray
– Spray Gun
– Brush or Roller

A two components acrylic aliphatic polyurethane gloss
finish coat

Excellent gloss and color retention.
Outstanding weather resistance with excellent color and
gloss retention.
Resistance to broad range of corrosive atmospheres.
Excellent resistance to atmospheric exposure.
Hard, tough and abrasion resistance Good resistance to splash and spillage of acids, alkalis salt solutions and Aliphatic petroleum products. Refer to specific instructions for primer and intermediate coats being used for Finish Coat All previous coats must be clean and dry.
Old coating system must be roughened, cleaned and dry.

Polyurethane finish coat where attractive appearance and
a wide range of protection is required

– Airless Spray
– Conventional Spray
– Brush or Roller

A two components acrylic aliphatic polyurethane gloss
finish coat

Excellent gloss and color retention.
Outstanding weather resistance with excellent color and
gloss retention.
Resistance to broad range of corrosive atmospheres.
Excellent resistance to atmospheric exposure.
Hard, tough and abrasion resistance Good resistance to splash and spillage of acids, alkalis salt solutions and Aliphatic petroleum products. Refer to specific instructions for primer and intermediate coats being used for Finish Coat All previous coats must be clean and dry.
Old coating system must be roughened, cleaned and dry.

Polyurethane finish coat where attractive appearance and a wide range of protection is required

– Airless Spray
– Conventional Spray
– Brush or Roller